Forklift Battery Safe Installation and Charging
Batteries utilized in forklifts are expensive pieces of equipment which are fairly big weighing in the thousands of pounds. The job of installing and charging these batteries is something which should be really planned out in advanced so as to make sure that these procedures are able to be done safely and properly. Maintaining correct handling and a sound charging method can really increase the regular lifespan of a battery.
Standard Charging
It is essential not to connect the battery to the charger until it is at 20 percent capacity or lower. By charging the battery when it is more than 20%, the lifespan of the battery could actually be shortened. On around every 5th charge cycle, the charger must be set on the equalize or weekend setting, depending on what kind of charger you are utilizing.
The charging cycle must never be interrupted. As soon as the charge cycle is done, you should avoid using the battery for some hours. By practicing these methods, you could help ensure that you get the maximum battery performance available.
Charger Maintenance
Make sure the charger is turned off prior to hooking up the battery to the charger. You then can connect the charger to the battery. This is a common error which can accidentally cause damage to both the charger and the forklift. It is also really important that the amperage of the battery should match that of the charger.
Do not ever allow the battery to deep discharge or completely discharge. This would shorten the battery life significantly and may even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician must be called in order to re-set the charger prior to charge being able to start.